 Download the Data Sheet
G.vector to optimize performance and CAPEX
The ZyXEL VMG8324-B10A supports the Vectoring technology that eliminates cross-talk or interference among different VDSL lines. With the mechanism, Vectoring significantly increases the bit rates to compete with cable/fiber technology as well as to enlarge the service coverage without changing the current infrastructure—a way to save cost significantly comparing to fiber-to-the-home (FTTH) deployments, and CAPEX can also be optimized by the improved data rates and coverage without upgrading the equipment.
Combo WAN for simplified ISP logistics and optimized CAPEX
With the ZyXEL VMG8324-B10A, there’s no need for service providers to invest on and replace new CPEs at customer sites when customers migrate from ADSL2+ or VDSL2 to PON or LTE; all they need to do is to unplug the DSL line, and then plug the Ethernet cable to the Ethernet WAN port as the existing CPE VMG8324-B10A will be used to terminate the IP connections via the WAN interface. In most cases, users can still connect with the original CPE to avoid replacing the unit due to the difference of physical connections.
802.11n technology for superior Wi-Fi performance and coverage
The ZyXEL VMG8324-B10A features 802.11n technology to provide the ultimate solution for both speed and coverage. With 802.11n wireless data rates of up to 300 Mbps, the VMG8324-B10A provides stable, reliable wireless connections for high-speed data and multimedia usages. The 802.11n technology empowered the device to eliminate dead zones and extend coverage while retaining backward compatibility with any certified device.
Quality of Service (QoS) support
With QoS features, service providers can freely design their QoS policies and prioritize the missioncritical services such as IPTV and VoIP based on their service plan offerings. This increases network efficiency and productivity that enable service providers to offer a real multi-play solution meeting the needs of residential users.
TR-069 remote management
The ZyXEL VMG8324-B10A incorporates the TR-069 standard management specifications for service provider to manage and configure client devices remotely without end user intervention. This feature offers a true "plug-and-play” experience while reducing deployment complexity to help saving operating and maintenance costs for service providers.
System Specifications
Wireless
 IEEE 802.11n 2.4 GHz with up to 300 Mbps data rate
Wireless Protected Setup (WPS)
WEP data encryption (64/128 bit)
WPA/WPA2, WPA-PSK/WPA2-PSK
Wi-Fi scheduling
Multiple SSID (up to 4)
VDSL and ADSL Compliance
VDSL/ADSL2+ compliance
VDSL2 (G.993.2), band plan Annex A, Annex B(over POTS)
Support profile 8a, 8b, 8c, 8d, 12a,12b, 17a
VDSL1 (G.993.1)
ADSL2+ (G.992.5) support Annex A, I, M
ADSL2 (G.992.3) support Annex A, I, L, M
ADSL (G.992.1) Annex A
ANSI T1.413 issue 2
G.INP (G.998.4)
G.vector (G.993.5)
VLAN/QoS
Support flexible traffic classification
6-bit DiffServ Code Point (DSCP, RFC 2474)
802.1P 3-bit Class of Service (CoS)
802.1Q 12-bit VLAN ID
Router/Bridge Features
IEEE 802.1d transparent bridge
PPP over Ethernet (RFC 2516)
MAC encapsulation routing/IPoE
Network Address Translation (NAT)/Network Address Port Translation (NAPT)
NAT server (Port forwarding)
DHCP client/server/relay
DNS proxy/dynamic DNS
Static route/policy routing
IGMP v1, v2, v3
IP protocol v6 (IPv6)
Voice Functionality
SIP v2 (RFC 3261)/SDP (RFC2327/3264)
RTP/RTCP (RFC1890)
Codec: G.711, G.726, G.722
G.168 echo cancellation
Voice Activity Detection (VAD)/Comfortable Noise Generator (CNG)
Dynamic jitter buffer
Dual Tone Multi Frequency (DTMF)
CLIP/CLIR
Phone Features
Caller ID (FSK.DTMF)
Call forwarding (No condition, Busy,No answer)
Call transferring (Blind, ConsultOnHold,Attendant)
Three way conference
Conference-DSP local mixer
Interactive Voice Response (IVR)
Flash hook timer
Message waiting indicator (RFC 3842)
T.38 fax relay
Transparent fax rely over G.711
Flexible dial plan (RFC3525 section 7.1.14)
Security
Firewall
Generic packet filter
DoS attack prevention
Parental control
USB
File sharing
3G backup
Management
Web GUI (HTTP/HTTPS)
Command Line Interface (CLI)
Firmware upgrade via HTTP/FTP/TR-069
DSL forum TR-069/TR-098/TR-111/TR-064
802.1ag Connectivity Fault Management (CFM)
Hardware Specifications
WAN:
One RJ-11 interface for VDSL (over POTS)
One RJ-45 connector for Giga-Ethernet WAN port
LAN: Four 10/100/1000M Auto MDI/MDI-X RJ-45 ports
Wireless: Two internal 3 dBi antennas (2.4 GHz)
Button:
One reset button
One WPS on/off switch button
One WLAN on/off switch button
One LED on/off switch
Two FXS ports
Two USB 2.0 host ports
Status LEDs indicators: PWR/SYS, DSL,INTERNET, WAN, ETHERNET, WiFi 2.4G,Phone1, Phone2, USB1 and USB2
Power supply: 12 V DC 1.5 A
Physical Specifications
Item dimensions (WxDxH):206 x 181 x 35 mm (8.11” x 7.12” x 1.38”)
Item weight: 510 g (1.13 Ib.)
Packing dimensions (WxDxH):325 x 245 x 66 mm (12.79” x 9.64” x 2.6”)
Packing weight: 1,040 g (2.3 Ib.)
Environmental Specifications
Operating Environment
Temperature: 0°C to 40°C
Humidity: 20% to 85% (Non-condensing)
Storage Environment
Temperature: -30°C to 60°C
Humidity: 20% to 90% (Non-condensing)
Certification
EMC
EN61000-3-2, EN61000-3-3, EN55022 Class B
Safety
EN60950-1
|
